SSB 9800mAh 290Wh/kg 12S1P 44.4V 5C Semi-Solid States LiPo Battery

Subtitle: High Energy Density Semi-Solid Soft Pack Battery for Industrial UAV, VTOL, Inspection & Logistics Drones

2. Product Purchase Module

SKU Code: SSB981210

Inquiry Price (Regular price $1.00 for display only, contact info@au-line.com for actual quotation)

Connector Options: XT60 Plug, XT90 Plug, XT150 Plug, EC8 Plug

3. Core Product Parameter Table

Item	Specification
Brand	AULINE
Product Model	SSB981210
Battery Type	Semi-Solid States Soft Pack LiPo Battery
Series Configuration	12S1P
Nominal Voltage	44.4V
Full Charge Cut-off Voltage	50.4V
Discharge Cut-off Voltage	36V
Rated Capacity	9800mAh
Total Weight	1480g
Dimension (HWL)	7862160mm
Energy Density	290Wh/kg
Continuous Discharge Rate	5C （Burst 10C for 5 Seconds, Several cycles）
Matching Plug Options	XT60 / XT90 / XT150 / EC8
Application	Industrial UAV, VTOL Aircraft, Power Inspection Drone, Logistics Transport Drone, Aerial Survey Mapping UAV

4. Product Highlights Section

Card 1: Ultra High Energy Density 290Wh/kg

Adopts upgraded semi-solid high-nickel cathode material, energy density up to 290Wh/kg, far higher than traditional liquid LiPo batteries. The total weight of the battery is only 1480g, same weight brings significantly longer flight endurance, effectively reducing battery replacement frequency for long-time cruise missions.

Card 2: Stable 5C Continuous Discharge Performance

Supports steady 5C continuous large-current output, stable voltage platform during full discharge cycle, low voltage drop. Perfect for heavy takeoff, climbing and long-duration hovering of industrial multi-rotor & VTOL drones. Full charge voltage reaches 50.4V, discharge stops safely at 36V to protect cell service life.

Card 3: Multiple High-Current Plug Customization

Equipped with four mainstream high-power connector options (XT60/XT90/XT150/EC8), compatible with most industrial UAV ESC, motor and wiring harness systems, supports OEM custom wire length and terminal plugs.

Card 4: High Safety Semi-Solid Soft Pack Structure

Semi-solid electrolyte formula reduces liquid leakage risk; soft aluminum plastic film encapsulation with built-in multi-layer explosion-proof composite film. Low thermal runaway risk, stable operation in complex outdoor working environments. Strict voltage protection between 36V–50.4V avoids overcharge and over-damage.

5. Application Scenarios Module

Aerial Survey & Mapping VTOL UAV Ultra-long endurance supports large-area terrain mapping and 3D modeling; stable discharge ensures consistent power for long-distance cruise flights. Power & Photovoltaic Inspection Drone Adapt to high-altitude, low-temperature mountain environments; stable power supply guarantees clear image and data transmission of thermal imaging inspection equipment. Heavy-Duty Logistics Transport UAV Strong continuous discharge capacity meets the power demand of mountain and island material delivery, improving single-flight cargo load capacity. Large Industrial Multi-Rotor Working Drones Compatible with plant protection, environmental monitoring, offshore patrol and other industrial low-altitude operation equipment.

6. Usage Precautions

Must use dedicated lithium battery charger matching 12S pack voltage (max charging voltage 50.4V); prohibit mismatched chargers to avoid overcharging and swelling. Strictly avoid over-discharging below 36V pack cut-off voltage to prevent permanent capacity attenuation and cell failure. For long-term storage over 7 days, adjust single cell voltage to nominal storage voltage and store in a dry environment below 25℃. Not recommended for FPV racing drones with frequent extreme acceleration and instantaneous overload flight.

SSB 9800MAH 290Wh/kg 12S1P 44.4V 5C XT60/XT90/XT150/EC8